Cell Tower Radiation Testing – RF Exposure Assessment

Radio Frequency RF Testing Services

cell_tower1Cell towers are being installed almost everywhere! Look at the top of any building higher than a few stories. Unsightly cell towers. They’re not only aesthetically unappealing, but they can give off high levels of radiation. How high are the RF levels, and are they safe? Let us find out for you.

WE TEST THE RADIATION COMING FROM NEARBY CELL TOWERS

WE’LL HELP YOU UNDERSTAND YOUR OPTIONS IF THE READINGS ARE TOO HIGH

img_4943EMF Home Inspections performs testing and site assessments for homes, schools, building managers, or municipalities on what the RF levels are near cell phone or broadcast towers.

The report that we produce will allow you to compare measured levels with Maximum Permissible Exposures, precautionary guidelines, and average readings found elsewhere in comparable environments.

If new antennas or towers are planned for your location, we can help you establish a baseline RF level for later comparison (before and after testing). We can provide follow-up readings once the new antennas are installed.emf waves

Use our testing results to empower yourself to make a decision about YOUR RF environment.

Our training is with GEOVITAL ACADEMY, the leader in RF detection and remediation. Our assessment services are powered by the latest training in the full range of electromagnetic knowledge and radiation protection. We use the finest professional meters, with detailed accuracy.

We offer a wide range of remediation options, from simple and affordable advice to various shielding options.

CONTACT US HERE

We use advanced meters to perform accurate RF exposure assessments. We test EMF radiation coming from cell towers, antennas, FM/TV, WIMAX, WiFi.

Testing for EMF radiation before you purchase a new home or for your existing home. What you need to know.

Trifield EMF Meter
Trifield EMF Meter

In order to properly test for  electromagnetic fields (EMFs), you need a test meter to do the job. Actually, you need 2 or 3 of them. There are three types of EMF you need to measure:

Magnetic fields

This type of radiation is the one that’s linked to serious health effects most often. For example the connection that research has shown between power lines and childhood leukemia. Magnetic fields radiate from power lines, building wiring, lights, appliances — that is, things that are powered by electricity. For this, we measure in units called milligauss (mG). Our meter of choice for this type of EMF is the Trifield Meter Model 100XE. It is a proven leader for magnetic field testing. It is extremely sensitive and accurate. It measures down to 0.2 mG. Note: you want to see below 2 mG and ideally below 1 mG to avoid health problems. 0.5 and below are even better.

Electric fields

These are responsible for the other half of the electro-magnetic equation and also radiate from power lines, wiring, lights, appliances, etc. Electric fields can also affect optimal health in humans and animals. We measure them in units of volts (V), or volts per meter (V/M). For this type of EMF, we use the ESI 24 EMF meter, made in Germany. It tests for all 3 types of EMF fields, so we use it to corroborate our other meters’ readings, and rely on it heavily for the electric and RF readings.

A note about electrosmog: also known as electrical pollution or dirty electricity, we use the STETZERiZER® Microsurge Meter by Graham-Stetzer, which is designed to separate the power line frequency to detect and respond to low level high frequency voltages caused by transients and harmonics on power lines. This meter is plugged into wall outlets one by one to determine where dirty electricity exists. STETZERiZER® filters are installed in the outlets with the highest readings.

Radio frequency

“RF” for short, these are also referred to as High frequency. This includes microwaves coming from cell towers, cellular phones, microwave ovens,  TV, radio towers, cordless phones, WiFi, and electronic devices. RF is usually measured in units of microwatts per centimeter squared (μW/cm²).  For this type of EMF, we use the ESI 24 EMF meter.

What We Do

We can come to your home or office to do an EMF inspection. We use each of the meters described above when we test for harmful EMF fields. We can also rent these meters to you for subsequent needs. Studies are emerging that indicate EMF-caused damage to human tissue, cellular structure and the nervous system. We’re here to help you measure, identify and reduce the potential harms of electromagnetic fields.

We sell and install Stetzer filters and do EMF home inspections in Toronto Ontario and surrounding area.
Contact Us:
(905) 719-7030
Email Us